Search results for "thermal [correlation function]"
showing 10 items of 1923 documents
Phase evolution by thermal treatment of equimolar cobalt–magnesium cordierite glass powders
2004
Abstract The structural evolution with annealing time at temperatures between 900 and 1100 °C of loosely compacted equimolar cobalt–magnesium cordierite glass powder was reported. The glass, with composition MgCoAl4Si5O18, was prepared by melting a glass precursor, previously synthesized by a semiwet method, at 1650 °C. Field emission scanning electron microscopy (FESEM) of isothermally heated glasses at 900 and 950 °C revealed increased phase separation with thermal treatment. X-ray diffraction (XRD) results of these powders indicated that the first crystalline phase formed was μ cobalt-containing cordierite which transformed to α cordierite with longer annealing. At the beginning of the μ…
SURFACE AND VOLUME CRYSTALLIZATION OF METALLIC GLASS (Ni50Zr50)99.9P0.1 AS INVESTIGATED BY EXOELECTRON EMISSION (EEE) AND DIFFERENTIAL THERMAL ANALYS…
2002
Surface and volume crystallization of amorphous, melt-quenched (Ni50Zr50)99.9P0.1 alloy has been investigated by measurements of the temperature dependencies of the intensity of photostimulated exoelectron emission (EEE) and by differential scanning calorimetry (DSC). A comparison of these dependencies enables one to assess the tendency of the investigated materials to premature surface crystallization. For the (Ni50Zr50)99.9P0.1 alloy the surface crystallization occurs at temperatures distinctly lower than that for the crystallization in bulk. The activation energy for the surface crystallization, determined by the Ozawa method, i.e. from the shift of EEE peak corresponding to the surface…
Composition and Color of Maya Blue: Reexamination of Literature Data Based On the Dehydroindigo Model
2019
[EN] An analysis of literature data studying the composition and color of Maya blue (MB) type materials prepared from indigo, dehydroindigo, and different aluminosilicates, accompanied by new spectral data, is presented. After thermal treatment at above 100 degrees C, indigo-based specimens displayed Raman and UV-vis spectroscopic features common to those of equivalent dehydroindigo-based replicants, thus supporting the socalled dehydroindigo model (J. Phys. Chem. B 2006, 110, 6027-6039) in which the dehydroindigo/indigo ratio, increasing with temperature, is crucial to determine the color of MB and its variability. The current analysis supports the view of MB as a polyfunctional hybrid mat…
Zirconia Based Nanomaterials for Oxygen Sensors – Generation, Characterisation and Optical Properties
2007
Microwave driven hydrothermal synthesis and hydrothermal synthesis were used to obtain ZrO2 nanopowders. Their production with varying phase composition, the characterisation and selected optical properties concerning their potential use as luminescence oxygen sensors are reported. It was found that the powders obtained by the microwave driven hydrothermal method and annealed at 750 0C in air show experiment repeatability within an accuracy of 6 %.
Relaxor ferroelectric PbSc1/2Nb1/2O3—PbZn1/3Nb2/3O3— PbMg1/3Nb2/3O3ceramics
2000
Abstract Original ternary solid solutions PbSc1/2Nb1/2O3 — PbZn1/3Nb2/3O3-PbMg1/3Nb2/3O3 (PSN-PZN-PMN) have been synthesized by solid state reaction from oxides. Ceramic samples have been obtained by both conventional and hot pressing techniques. The density of the obtained hot pressed ceramics reaches 98% of the value calculated from X-ray data. Dense, high quality samples of pure PZN and compositions containing over 0.8 molar parts of PZN could not be obtained — porosity was up to 10% and they were mainly comprised of the cubic pyrochlore phase. Density, porosity, water absorbtivity, and dielectric permittivity and dissipation factor of the ceramic samples have been measured. Data of diff…
Dielectric Dispersion and Ion Conductivity in High-Pressure LixNaw1-xNbO3Solid Solutions
2009
Thermal behaviour and dispersion of dielectric permeability and thermal behaviour of conductivity measured in ferroelectric ceramic solid solutions of Li x Na 1−x NbO 3 (x = 0.17, 0.25) synthesized at high pressure and possessing extended region of homogeneity are reported. The Li x Na 1−x NbO 3 (x = 0.17, 0.25) solid solutions of perovskite structure are found to be super-ionic conductors at rather low temperatures O ≥ 400 K. Dielectric dispersion and anomalous behaviour of dielectric permeability are observed in the thermal range of super-ionic conductivity corresponding to structural transformations in the high-pressure solid solutions.
Oxygen stoichiometry control of nanometric oxide compounds: The case of titanium ferrites
2011
Three techniques have been coupled with an original device, based on H{sub 2}/H{sub 2}O equilibrium, controlling oxygen partial pressure: XRD, TGA and DC conductivity in order to characterize very reactive compounds such as nanometric powders. From XRD, both the structure and the oxygen stoichiometry (thanks to their lattice parameter) were investigated in situ. From TGA, it was the oxygen stoichiometry (thanks to mass gain or loss) which was determined. From DC conductivity, it was both the structure and the oxygen stoichiometry (thanks to the activation energy) which were obtained. The advantages were to determine very rapidly and with a small amount of powder the equilibrium conditions (…
Mechanism of crystallization of Co-cordierites from stoichiometric powdered glasses
2002
Abstract The influence of cobalt, as a divalent cation, on the crystallization behaviour of the cordierite based glasses was studied. Powdered glass specimens of stoichiometric composition 2MO 2Al 2 O 3 5SiO 2 (M=Co and/or Mg) were obtained and thermally treated at several temperatures and times, and the sequence of crystallization and their microstructural evolution were analysed by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). Results on the crystallization sequence showed that the steps in the crystallization path are independent of the nature of the divalent cation. The first crystalline phase detected displayed the μ-cordierite structure, i.e. a solid…
Electrochemical Studies of Nonstoichiometric TiO<sub>2-x</sub> Ceramic
2014
TiO2 ceramic was prepared using extrusion technology and thermal treatment in two stages: sintering in air and subsequent annealing under high vacuum conditions. Sample thermal treatment in high vacuum conditions causes formation of nonstoichiometric titanium oxide ceramic. As a result electrical conductivity of the material significantly increases. Such a material can be used for electrode production for electrochemical water treatment.
Influence of Anodic and Thermal Barrier Layers on Physicochemical Behavior of Anodic TiO2 Nanotubes
2011
Electrochemical and photo-electrochemical behavior of self-organized TiO2 nanotubes formed in organic solvents have been studied by taking into account the formation of new barrier layers beneath nanotubes either due to the anodic polarization in aqueous solutions or air exposure during high temperature annealing. It has been shown that before annealing, electrochemical and photoelectrochemical answers are dominantly controlled by the physicochemical properties of the anodic barrier layer. Annealing in air at sufficiently high temperatures changes the initial amorphous structure of as-prepared nanotubes and forms a new oxide layer below them due to thermal oxidation of underneath titanium. …